The Humid Weather Is Coming Again. You Must Understand These Knowledge About How To Properly Maintain And Use LED Displays in Seconds

1. Check the circuits and switches, keep the switches dry to avoid leakage and electric shock accidents.

2. Moderate ventilation can help the water vapor attached to the display screen evaporate quickly and reduce the relative humidity of the indoor environment. But avoid ventilation in some windless and humid weather, which will increase the indoor humidity.

3. Use air conditioning to dehumidify and place desiccant and physical moisture absorption methods to keep dry and prevent the display screen from getting damp.

4. When the rental indoor LED display screen is used outdoors, it must be turned off immediately when it rains. If it is not possible to dismantle the screen, quickly cover it with a pre-prepared rainproof cloth, and take out the box to dry it on a sunny day. If it is continuously rainy, open the back cover of the box and use a fan to blow dry with cold air. Then place it in a ventilated and dry room for more than 8 hours. Lower the brightness to ensure that it is lit for more than 4 hours to fully dissipate the moisture in the electronic components.

5. In the rainy season, the LED screen display screen should be used at least once a week, and the screen should be turned on at least once a month for more than 2 hours.

6. The use environment of outdoor display screens is complex, and it is inevitable that there will be water seepage in the cabinet. In addition to the above measures, it is necessary to regularly check whether the waterproof rubber ring of the cabinet is aging, deformed, or incomplete; whether the screws or locks of the sealed cabinet are easy to loosen and the pressure is insufficient.

7. The screen that has been shelved for a long time should be powered on and maintained and debugged frequently. Whether it is an indoor LED display screen or an outdoor LED display screen, if it is not used for a long time, there is a high probability that dead lights and blind spots will appear when it is activated again. With the correct maintenance knowledge, such problems can be completely avoided.

1. Use a fan or other tools to completely dry the damp LED display screen at the fastest speed.

2. Power on the completely dried screen for aging. The specific steps are as follows:

a. Adjust the brightness (full white) to 10%, and power on for aging for 8-12 hours.

b. Adjust the brightness (full white) to 30%, and power on for aging for 12 hours.

c. Adjust the brightness (full white) to 60%, and power on for aging for 12-24 hours.

d. Adjust the brightness (full white) to 80%, and power on for aging for 12-24 hours.

e. Adjust the brightness (full white) to 100%, and power on for aging for 8-12 hours.

1. Keep the air boxes and packaging boxes dry, place desiccant and dehumidification media, and dry the packaging materials in time when they enter the water vapor, and do not contact water.

2. The screen storage warehouse must be dry and high, and it is best to place an industrial dehumidifier.

3. After the humid weather, the stored LED display screen is lit for inspection, and if necessary, seek technical support from the manufacturer.

1. Choose high-quality LED display screens produced by high-quality manufacturers;

2. Regularly inspect and maintain to prevent accidents and increase service life;

3. Technicians develop good usage habits and learn scientific usage methods.